|
Post by minkmandan on Dec 15, 2007 19:40:24 GMT -5
Thats a great looking condo, Dave ! I've used a similar one for yrs. w/ good success. Mine doesn't have the cage on top though, and instead of pvc it has a conical wire funnel that leads to the bottom half. The top of the funnel where it goes through the board is about 5.5" dia. and it tapers down to bout 3". The bottom edge of the funnel has the wire snipped open so it has points sticking down. Wire a couple ears of sweet corn to the bottom of the submerged cage and go sharpen your skinnin' blade ! You can clear out a good size pond in short order once they start using it. On the down side, I was hassled 3 times by wardens while usin it on public lakes, I never got cited, they could never decide if it was legal or not ( in Ohio ), but one said he would if he caught me usin it again, said it was a variation on the old barrel trap, although it's not ! Go figure.
|
|
|
Post by g3trappernc on Dec 15, 2007 19:57:37 GMT -5
I am starting to realize that extra floatation is needed on the one I am using. The PT lumber is saturated and starting to sink a bit, after just a couple of days. Needs some foam under it for sure. I just need to fgure out how much.
|
|
|
Post by mountainman on Dec 16, 2007 12:55:12 GMT -5
John, I really havent built that many floats but have got some to work. I wish I could do pictures but will describe them as best I can. Right now I have a larger 2 trap rig I built with a small section of log, 2X4 side rails and wooden slats on the bottom for a platform. On the bottomside I made a couple of wire cages of 1"X2" wire and used 4 washed out motor oil jugs for pontoons. I anchor that one with a cord and window weight.
The few other floats I have are narrow triangular 1 trap rigs for using in a current. They're made of 2X4s and plywood with about 1" of foam insulation board held on with chicken wire.
I designed a float to use two 110s but havent built one yet. Just an idea, maybe.
|
|